Spun Bonded Filter Cartridges are made up of 100% polypropylene fibers. The fibers have been carefully spunned together to form a true gradient density from the outer to the inner surface. Filter cartridges are available with both core & without core versions. The superior structure remains integral even under severe operating conditions and there is no media migration. Polypropylene fibers are blown continuously on the central molded core, without any binders, resins or lubricants.
Unfiltered fluid passes through a depth filter matrix and enables the progressive retention of finer particles, which provides higher efficiency, better dirt retention & longer filter life. The fluid flows from outside to inside through filter media. Particulates are held securely in the filter matrix and clean fluid flows to the downstream side of the cartridge.
Graded Density Structure for effective pre filtration and final filtration.
Extremely consistent manufacturing
Made of 100% pure polypropylene
Free of binders, adhesive and surfactants
General water grade, High performance grade and Absolute grade filters available
Configurations available to retrofit most industry standards
Coreless structure for easy cartridge incineration and disposal
- RO Pre filtration
- Petrochemicals
- Desalination
- Plating Solutions
- Pharmaceutical Pre filtration
- DI water
- Photographic Chemicals
- Paints and Inks
- Water & Waste Water Treatment
Media : Polypropylene ; Cotton
Structure : Coreless
End caps : Polypropylene (PP)
Efficiency of Filter : 0.5, 1, 3, 5, 10, 25, 50, 100 micron
End Connection : SOE or DOE
O Rings / Gaskets (for SOE) : Buna N, EPDM, Silicone, Viton
Nominal lengths : 9.75, 10, 20, 30, 40 inches
Diameter : ID/OD: 1.1” (28 mm) / 2.5” (63 mm)
End connections : DOE (standard) / SOE (optional)
Max operating temperature : 80°C
Recommended Change out differential pressure : 35 PSID
